In the present study, we used various plant parts (barks and leaves) to utilize the feasibility of removing chromium from tannery effluents. In batch experiments, some physical parameters (like adsorbent dose and contact time) that primarily influence adsorption were studied at a fixed pH of 3. The present evaluated results (i.e., equilibrium adsorption) are well supported by Freundlich plus Langmuir’s model. Here, the highest monolayer adsorption capacities (qe) were found to be 19.23, 18.98, 16.78, 15.27, and 18.66 mg/g for Azadirachta indica leaf (AI), Platanus orientalis (PO), Tamarind indica bark (TI), Mangifera indica bark (MI), and Eucalyptus obliqua plant bark (Eu) respectively. However, at optimum conditions (12-hour contact period, 15g dose), the adsorption capacity was measured 14.48, 12.61, 14.6, 12.76, and 14.46 mg/g by AI, PO, TI, MI, and Eu, respectively. Under this operating condition, total dissolved solids (TDS) (81.28 to 94.40 %), conductivity (82.26 to 94.61 %), and turbidity (80.47 to 93.95 %) of effluent were also significantly reduced. All of this bio-adsorbent could be used to heal tannery sewages/effluents and other domestic wastewater.