The site of Islamabad (capital of Pakistan) is located close to the axis of the Hazara-Kashmir syntaxis (HKS), which is the eastern boundary of NW Himalayan Fold-and-Thrust Belt, Pakistan. The tectonic features like Main Boundary Thrust (MBT), Mansehra Thrust, Jhelum Fault, Kotli Thrust, Riasi Thrust, Sangargali Thrust, Hissartang fault etc., present in the close vicinity of it, are seismically very active. In the present work, an attempt has been made to characterize the area on the basis of strong motion parameter i.e. the peak ground acceleration (PGA). For this purpose a catalogue containing instrumentally recoded events of magnitude 4 and greater has been used. Seismic source regions are modelled to establish relationships between earthquake magnitude and earthquake frequency. Since Pakistan does not have an attenuation equation of its own, the appropriate attenuation equations have been selected. Seismic hazard curves have been generated based on probable PGA for 10% probability of exceedance for time-spans of 50 years (return period 475 years) using the EZ FRISK software. Twenty four faults have been selected as the critical seismogenic features and their maximum potential magnitudes determined using four regression relations. MBT with the maximum potential magnitude of 7.8 and PGA value of 0.15g is designated as the most critical tectonic feature for the site of Islamabad.