No Detail Found!

Design and development of GUI for the mitigation of chromatic dispersion: a new approach

Author(s)
Bhagwan Das Department of Electronic Engineering, Quaid-e-Awam University of Engineering, Science and Technology, Nawabshah, Sindh, Pakistan.
Nawaz Ali Zardari Department of Telecommunication Engineering, Quaid-e-Awam University of Engineering, Science and Technology,Nawabshah, Sindh,Pakistan
Farah Deeba Faculty of Engineering and science Technology, Department of Computing, Hamdard university Karachi, Pakistan
Dileep Kumar Ramnani Department of Electronic Engineering, Dawood University of Engineering & Technology,Karachi, Pakistan
Abstract
Chromatic Dispersion (CD) is the important effect that is considering for optical communication system design as it broadens the pulse during the propagation along channel resulting in pulse overlapping and ultimately bit errors raises. The increment in bit error, in result reduce the performance of optical system. Therefore, mitigation CD is necessary in order to improve the performance of optical communication system. There are several techniques of mitigating CD have been proposed and all based on coding based and this will create issues for the communication design engineer that every time the parameters need to be revised. In order to avoid this issue, the ease for the system design engineer has been created in designing the Graphical User Interface (GUI). In this work, GUI is designed and developed that will request the parameters need to be select for the optical system and it will describe the all process for mitigating it from the system. In the first, the communication system designer have to select the Transmission along with modulation and after that transmission at distance is asked in terms of km. The CD is mitigated uses least mean square technique and Fast Fourier Transform method. The further smoothing of signal is improved by Pulse shaping via using the raised cosine filter. In the end, the original signal and the compensated signal are defined. The BER is also calculated to show whether the reduction through DSP is performed. The GUI is developed in MATLAB and every button backhand the strong coding is used in C++ for developing the system. The proposed design of GUI for the reduction in Chromatic Dispersion has successfully attained the reduction of CD as 40%. In addition to that BER of 10-3 has been attained using the proposed system. The system was designed and developed for the QAM modulation schemes. The designed system has been tested for the 10 Gb/s data rate. The designed and developed system offers the ease of use for the communication engineer, in which on one platform the user can observer well the optical system instead of programming.
Publication Details
Page(s) 19-31
DOI DOI not available
Published Journal: Sukkur IBA Journal of Emerging Technologies (SJET), Volume: 5, Issue: 1, Year: 2022

Request the full text from PASTIC

Keywords
Digital Signal Processing, Chromatic Dispersion, Graphical User Interface, MS VISIO
0

Citations

0

Downloads

61

Views