No Detail Found!

Synthesis And Characterization Of Nano-fibres Graphene Oxide For Sensing Humidity

Author(s)
M. Arif Center for Advanced Studies in Energy, University of Engineering and Technology, Peshawar, Pakistan
N. Saba Department of Electronics, University of Peshawar, Peshawar, Pakistan
A. Naveed Center for Advanced Studies in Energy, University of Engineering and Technology, Peshawar, Pakistan
M. Sadiq Department of Mechanical Engineering University of Engineering and Technology, Peshawar, Pakistan
S. Afridi Center for Advanced Studies in Energy, University of Engineering and Technology, Peshawar, Pakistan
F.H. Khan Department of Industrial Engineering, University of Engineering and Technology, Peshawar, Pakistan
M. Asif Department of Electronics, University of Peshawar, Peshawar, Pakistan
Abstract
Relative humidity is the prime parameter in industrial processes, which are measured through the ceramic, metal oxide and polymeric sensors. Ceramic and metal oxide sensors show nonlinear resistive behaviours with increasing relative humidity and high sintering temperature for hydro-desorption. The transformation of ceramic and metallic sensors with polymeric sensors is due to its eco-friendly synthesis fabrication, less heatintensive and high sensitivity. In this research work, a polymeric sensor of enhanced electric properties with sustainable captive and resistive response was synthesised from nano-fibres graphene oxide for sensing humidity. The synthesized graphene oxide through the modified Hammer method was mixed with poly-vinyl alcohol (GO/PVA) in the ratio of 5 wt % for four hours at 90 ºC. Nano fibres of graphene oxide and poly-vinyl alcohol (GO/PVA) solutions were obtained at the 24V DC electric field; 0.5 ml/h feed rate and 10 cm tip-tocollector distance through electrospinning. GO/PVA fibres were deposited on the silver inter-digited electrodes of 8mm and five combs of 20ìm consecutive distance. SEM analysis shows that the fibres were in the nano-range with no major cracks while XRD and FTIR spectrum investigated the fingerprints and functional groups of GO and GO/PVA respectively. The parametric study of resistive and capacitive was analysed at different response and recovery times at various frequencies in the range of 0 % to 82% relative humidity.
Publication Details
Page(s) 71-76
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 50, Issue: 2, Year: 2022

Request the full text from PASTIC

Keywords
electrospinning, Graphene oxide, Inter-digited Electrodes, Electric Characterization
0

Citations

0

Downloads

29

Views