Moisture absorbers were used in a randomized full block design with three replications in the cultivation year 2020-21 in Miyaneh city, Iran, to examine their influence on the performance and yield components of the maize single-cross 704 cultivars. The initial variable was evaluated in three levels, comprising a1: control, a2: perlite adsorbent, and a3: superabsorbent, while the second variable was irrigation cycle in three levels, comprising 30, 70, 110 mm evaporation from normal pan with class (A). Numerous characteristics evaluated were shown to be affected by moisture adsorbents and varied irrigation cycles. Superabsorbent treatment resulted in the greatest 1000-seed weight of 342 g, compared to the mean values. With an average of 18,750 kilograms of dry weight per hectare, the class A pan's 30 mm evaporation irrigation cycle produced the best output. Superabsorbent treatment using irrigation cycle following 110 mm of evaporation from the pan yielded 75 kg/hL of weight per hectoliter. After 30 mm of evaporation from the pan, the irrigation cycle with perlite intervention yielded the best grain production (7100 kg/ha).Additionally, the control treatment with irrigation cycle following 110 mm evaporation from the pan (2100 kg/ha) had the minimum productivity.The findings of this study show that moisture absorption has a considerable impact on all the investigated features. However, hectoliter weight is an exception as a variable that under mild stress, its effectiveness is improved. In addition, each characteristic had a distinct purpose based on its irrigation cycle. An irrigation cycle after 30 millimeters of evaporation from the pan produced the maximum grain yield using superabsorbent.