No Detail Found!

Effect of different deacetylation parameters on the physicochemical properties of chitosan from shrimp shell waste

Author(s)
Yusof Nurhayati Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin,Besut Campus, 22200 Besut, Terengganu,Malaysia
Engku Nurul Nor Imas Engku Ibrahim Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin,Besut Campus, 22200 Besut, Terengganu,Malaysia
Asmaliza Abd Ghani Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin,Besut Campus, 22200 Besut, Terengganu,Malaysia
John Yew Huat Tang Faculty of Bioresources and Food Industry, Universiti Sultan Zainal Abidin,Besut Campus, 22200 Besut, Terengganu,Malaysia
Abstract
Chitin is primarily used for the production of chitosan by a deacetylation process using chemical hydrolysis. Deacetylation is the non-enzymatic process of extracting the residue of chitin which is acetamide groups at high temperatures and treating it with a strong alkali to produce different degrees of deacetylation (DDA) of chitosan. The production of shrimp shell waste from shrimp processing industries has undergone a dramatic increase in recent years that causing disposal and contamination problems. The purpose of this study was to investigate the effect of different concentrations of NaOH (10, 30 and 50%) and time of heating (15 and 30 minutes) during the deacetylation process on the yield and physicochemical properties of chitosan. The obtained chitosan was evaluated by their DDA, moisture content, viscosity, solubility, water binding capacity, and fat binding capacity. The best yield of chitosan produced was observed by using 10% of NaOH and 30 minutes of deacetylation was 93.43%. The viscosity of extracted chitosan obtained from shrimp shell waste in this study ranged from 240 to 764 cPa.s. The highest degree of deacetylation i.e., 62.23% was obtained by 50% of NaOH at 15 minutes of heating. Moisture content produced in this study was from 5.58 to 9.57%. The solubility of chitosan extracted from shrimp ranged from 0.9 to 11.27%. Water binding capacity and fat binding capacity of chitosan were obtained in the range of 113.49- 1137.4% and 460.18-783.84%, respectively. Chitosan produced in this study has the potential to be used as a colour stabilizer, dye-binding properties, thickener, and stabilizer for sauces and flavour extenders in the food industry.
Publication Details
Page(s) 286-294
DOI DOI not available
Published Journal: Bioscience Research, Volume: 19, Issue: SI-1, Year: 2022

Request the full text from PASTIC

Keywords
degree of deacetylation, Physicochemical Properties, Chitosan, Shrimp shell waste
0

Citations

0

Downloads

111

Views