No Detail Found!

Electrodeposited Co-Zr-P as a catalyst candidate for Hydrogen generation from NaBH4 Solution.

Author(s)
Yaarjan Korea Advanced Institute of Science and Technology, South Korea
Kwangsap Oem Ghulam Ishaq Khan Institute of Engineering and Technology, Pakistan
Hyuksang Kwon Ghulam Ishaq Khan Institute of Engineering and Technology, Pakistan
Abstract
Co-Zr-P catalyst electroplated on Cu substrate in a chloride based solution with an addition of H2PO2-ions were developed for hydrogen generation from highly alkaline NaBH4 solution. The microstructure of Co-Zr-P and their hydrogen generation efficiency were analyzed as a function of cathodic current density at an electroplating time of 300s. An amorphous Co-Zr-P, catalyst formed at a cathodic current density of 0.75A exhibited the best hydrogen generation capability. The hydrogen generation capability of the electrodeposited Co-Zr-P catalyst is found to be a function of cathodic current density i.e. the parameters determining the concentration of P content in the Co-Zr-P catalyst. Co-Zr-P with 18at% of P electrodeposited at a cathodic current density of 0.75A for 300s showed the best hydrogen generation of 5500 mL/min g-catalyst. A previous study on Electrodeposited Co-P shows a hydrogen generation rate of 954 mL/min g-catalyst[1]. With the addition of a little amount of Zr in the electroplating bath P content increases so the source of Phosphorus i.e. Sodium phosphinate can be decreased accounting for cheaper electroplating bath cost.
Publication Details
Page(s) 94-98
DOI DOI not available
Published Journal: Proceedings 6th International Bhurban Conference on Applied Sciences and Technology , Volume: 1, Issue: 0, Year: 2009

Request the full text from PASTIC

0

Citations

0

Downloads

140

Views