No Detail Found!

Extractive separation of AI(III) and Ni(II) by Di-2-Ethylhexyl phosphoric acid -kerosene system from aqueous fluoride medium.

Author(s)
Muhammad Fakhrul Islam Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
Dil Afroz Begum Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
Muhammad Matiur Rahman Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
Muhammad Saidur Rahman Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
Abstract
In the study of the extractive separation of Al(III) and Ni(lI) by di-2-ethylhexyl phosphoric acid D2EHPA-kerosene from aqueous fluoride medium, about 94% AI(III) and 2% Ni(II) were extracted with 0.3 M D2EHPA (pH 2.1 and temperature. 30±1 oC). Extraction of Ni(II) decreased with increasing extractant concentration. D2EHPA-kerosene-fluoride system showed better extraction of AI(IlI) with higher extractant concentration and aqueous pH and vice versa for the extraction of Ni(II). The maximum separation factor (β~1380) was obtained for Al(III) at 20 oC and decreased to (β~732) at 60 oC. The separation of Al(III) from Ni(II) was favoured at normal temperature. Extraction followed the order Al(III) >>> Ni(II). About 99% stripping of Al(III) was attained from the loaded 0.20 M D2EHPA. Much faster extraction of Al(III) compared to Ni(II) and preferential loading were shown by D2EHPA-kerosene in the presence of fluoride ion in the aqueous phase. Separation of AI(III) was the most outstanding from Ni-Al-F-complex solution.
Publication Details
Page(s) 59-65
DOI DOI not available
Published Journal: Pakistan Journal of Scientific and Industrial Research, Volume: 52, Issue: 2, Year: 2009

Request the full text from PASTIC

0

Citations

0

Downloads

169

Views