No Detail Found!

Effect of wire point density of cylinder and stationary flats and flat speed on fibre growth.

Author(s)
S. M. Nawaz Department of Fibre Technology, University of Agriculture, Faisalabad, Pakistan
B. Shahbaz Department of Fibre Technology, University of Agriculture, Faisalabad, Pakistan
M. Q. Tusief Department of Fibre Technology, University of Agriculture, Faisalabad, Pakistan
Ismail Department of Fibre Technology, University of Agriculture, Faisalabad, Pakistan
Abstract
Cylinder speed, the raw material to be processed and the production rate determines the requirement of wire points per square inch for an effective carding. The rib thickness of the cylinder wire controls the carding. Generally finer the fibre, the finer the rib thickness so the wire points per square inch are carefully selected. Stationary flats in the carding machine act as a pre carding and guiding elements which assist to separate trash, common dust and short fibers in pre-carding zone. Well design stationary flats applications not only open the material properly but also curtail imperfections. Similarly the speed of top moving flats on the cylinder affects the quality of the product. An increase in flats speed results in an increase in card waste. Ultimately all these factors strongly affect the fibre growth. Hence to study the effect of these factors on fibre growth this research was made and it was noted that the effect for different wire point density of stationary flat (F), cylinder (C ) and flat speed (S) on the fibre growth was highly significant while all other interactions were non-significant.
Publication Details
Page(s) 82-84
DOI DOI not available
Published Journal: Pakistan Journal of Science, Volume: 60, Issue: 3--4, Year: 2008

Request the full text from PASTIC

0

Citations

0

Downloads

86

Views