Ferritic steels exhibit superior creep strength and potential for high resistance to radiation damage. The elevated temperature strength is enhanced by the development of a coarse grained microstructure during recrystallisation. At elevated temperatures, the property of material which is of importance is its creep resistance and it is very well established that one of the factors enhances creep resistance is larger grain size and due to large grains the number of grain boundaries are limited which minimizes the effect of grain boundary sliding. In the present work, recrystallisation behavior of alloy MA957 after isothermal annealing has been investigated. The alloy is an yttria dispersion strengthened, made by mechanical alloying. The microstructure after manufacturing process was fine and uniform but in heavily cold-deformed state. Materials seems to be recrystallising in a preferred direction after isothermal annealing at temperatures above 1250oC, the grain structure observed was columnar with an appearance of cast ingot type. The oxide particles were found to be aligned by the grain boundary traces.