Inverter plays very important role in many areas of Renewable Sources of Energy (RSE). One of the major developments in using RSE is solar power. This article introduces the power converter topology and consists of a power interface and various levels of MIT (Multilevel Inverter Topology). A modified version of the Cascade H-Bridge Multilevel Inverter (CH-MLI) has been introduced to improve power quality, power loss and topology complexity and cost. The input voltage is set to the rated voltage by the power converter and transferred to the DC bus. The MIT converts the DC bus voltage to AC and is supplied to an AC load. For such inverters, the ideal number of levels and switching frequency are explored, and five-level architecture is chosen based on the trade-offs. To suppress harmonics, this inverter uses a level shifted in phase disposition pulse width modulation technique, which was chosen after extensive testing of other advanced disposition pulse width modulation techniques. To lower the harmonics even more, the use of filters was studied, and an LC filter has been used, which yielded satisfactory results. The entire system is simulated with MATLAB / SIMULINK. The proposed inverter is compared to CH-MLI in terms of DC sources, number of switches, diodes, driver circuit and dv/dt stress.