No Detail Found!

The influence of heat treatment on mechanical and microstructure properties of intermetallic nickel aluminide, NI3AI

Author(s)
T. Joseph Sahaya Anand Fakulti Kejuruteraan Pembuatan, Universiti Teknikal Malaysia Melaka, 76100 Durian Tunggal, Melaka, Malaysia.
H.H.H. Afandi Fakulti Kejuruteraan Pembuatan, Universiti Teknikal Malaysia Melaka, 76100 Durian Tunggal, Melaka, Malaysia.
S. Shariza Faculty of Manufacturing Engineering, Universiti Teknikal Malaysia Melaka (UTeM), Melaka, Malaysia.
I.S. Othman Fakulti Kejuruteraan Pembuatan, Universiti Teknikal Malaysia Melaka, 76100 Durian Tunggal, Melaka, Malaysia
Sivaraos Fakulti Kejuruteraan Pembuatan, Universiti Teknikal Malaysia Melaka, 76100 Durian Tunggal, Melaka, Malaysia
Abstract
Intermetallic Nickel Aluminides have been used in automotive industry with its superior characteristics such as lightweight, good resistance in high temperature and corrosion, and high oxidation. Mechanical studies including hardness carried out to confirm this Intermetallic Nickel Aluminides suitable for automotive wheel hub. The samples were heat treated for 400°C, 500°C and 600°C and observed Scanning electron microscope for their microstructural behaviour. X-ray diffraction was used to study the crystal structure of the alloy and grain size were calculated. The highest hardness value is the Ni3Al sample at 600°C which is 213.38 HV at 0.5 kgf. Meanwhile the lowest value is at non-heat treated sample with the value of 56.66 HV at 2.0 kgf load force. Similar trend also observed for Ni3Al grain size is at the largest at 600°C with 45.462 nm and the smallest during non-heat treated at 22.725 nm. This shows that temperature affects the materials characteristics.
Publication Details
Page(s) 125-129
DOI DOI not available
Published Journal: Science International, Volume: 34, Issue: 2, Year: 2022

Request the full text from PASTIC

Keywords
hardness, Nickel Aluminides, grain size, Intermetallic compound (IMC).
0

Citations

0

Downloads

131

Views