The study aimed to develop and evaluate a manually operated banana slicer to be utilized by small-scale food processing industries. The banana slicer is designed to be portable, heavy-duty and safe. The device is composed of angle bars, hand crank, pillow blocks, flange bearings, shafting, bevel gear, cover plate, turntable, cutter blade and stainless tube as a feeder or chutes. After the prototype development, it is then subjected to performance evaluation with regards to its capacity, the weight of good cuts, the weight of rejects and slicing efficiency. The average capacity of the portable banana slicer was observed to be about 60kg/h when operated by a two-blade cutter at 120 rpm. It was also observed that the effective capacity of the device increased with an increase in the number of blades at all operating speeds. Similarly, as the rpm of the cutter plate was increased there was an increase in the effective capacity of the slicer. The slicing efficiency obtained is 90-96% at a cutting speed of 120 rpm. Hence, based on the evaluation conducted, a cutting speed of 120 rpm and a two-blade cutter should be employed to attain an optimum capacity of 60 kg/h with excellent slicing efficiency. The best chip geometry is also obtained at this speed. With this manually operated banana slicer, it is expected that backyard and small-scale banana processing industries will be enhanced in terms of productivity and product quality.