Functionally Graded Materials (FGMs) is a promising material in many structural applications due to their specific advantages over metallic materials and conventional composite materials. Functionally graded aluminum matrix composite (FGAMC) with silicon carbide has been used in the clutch as a friction material since it has an acceptable friction coefficient and high wear resistance. Clutches are designed to fit most of the current clutches in the market and studied under common working conditions of clutches in different applications. The FGM material is represented as layered solid parts, each layer with different properties, the properties are calculated using rule-of-mixture and power-law of Voight. The behavior of the FGAMC clutch plate is studied against natural vibration, forced vibration, and static analysis with Finite Element Method, by ANSYS. To evaluate the result, the FGAMC clutch is compared with two materials E-glass and Aluminum Matrix composite with 20% Silicon Carbide particles, the FGAMC also has Silicon carbide as the second material. Analysis reveals an increase in strain for the FGAMC over the traditional AMC. Adding to that a significant decrease in deformation at thickness direction and for stresses, in most analysis, it was the least. The drawbacks of the material are a rise in the mass resulting in low natural frequency, but the deformation is low. The obtained results combined with FE simulation will be used to exactly predict the properties grading function. The conclusion of the project will help for spreading the use of FGM in automobile engineering.