No Detail Found!

Analysis of steel pipeline corrosion in the context of oil and gas industry

Author(s)
Abdul Khaliq Department of Mechanical Engineering, College of Engineering, University of Hai’l, Kingdom of Saudi Arabia
Abstract
In this study corrosion rate of plan carbon steel AISI 1045 has been investigated. Steel piplines used for the transportation of fuel such as gas and oil are usually fabricated from AISI1045 grade. For corrosion study, aerobic and anaerobic conditions are selelcted which represents common environment conditions encountered in the oil and gas industry. Moreover, corrosive environment was sodium chloride based with a molarity of 3.5% in an aquaus solution.AISI 1045 steel coupans were hanged in the salt bath over 10 weeks and change in weight of them were recorded at regular intervals of time. For aerobic and anaerobic conditions, the change in weight difference was only 0.14g and it was also recorded that aerobic conditions experienced higher weight loss which was 0.19% higher than the other conditions investigated in this study. The 10 weeks results were extrapolated and it was observed that weight loss per year was 289.33 g and 124.26 g for anaerobic and aerobic environmental conditions respectively. The corroded samples were further characterised using scanning electron microscopy (SEM) for corrosion products observation and Raman spectroscopy for the identification of corrosion products. SEM revealed the corrosion is linked with pitting phenomenon and corrosion products is composed of oxygen, iron, sodium, manganese and silicon. Finally, the corrosion products were identified to be Fe2O3 based on the peaks observed during Raman Spectroscopy analysis. The identified peaks are 212.63, 207.63 and 271.21 which endorsed that the corrosion product is composed of Fe-oxide. This study provides guidelines for the oil and gas industry to estimate corrosion rate of steel in the salty environments.
Publication Details
Page(s) 29-32
DOI DOI not available
Published Journal: Science International, Volume: 33, Issue: 1, Year: 2021

Request the full text from PASTIC

Keywords
steel, Fuel Industry, AISI 1045, Corrosion rate
0

Citations

0

Downloads

54

Views