No Detail Found!

Forming of Alumina ceramics.

Author(s)
Bakht Bahadur Rana University of Engineering and Technology Taxila, Sub-Campus, Chakwal, Pakistan
Amir Sultan University of Engineering and Technology Taxila, Sub-Campus, Chakwal, Pakistan
Fadia Shaheen Pakistan Council of Scientific and Industrial Research (PCSIR) Laboratories Complex, Lahore, Pakistan
Fozia Salman Pakistan Council of Scientific and Industrial Research (PCSIR) Laboratories Complex, Lahore, Pakistan
Wajid Ali Shah Pakistan Council of Scientific and Industrial Research (PCSIR) Laboratories Complex, Lahore, Pakistan
Abstract
Alumina ceramic products were made by die pressing, slip casting and extrusion. The products were tested for various physical properties such as percentage shrinkage, hulk density, apparent porosity, water absorption, scratch hardness and thermal conductivity. Increase in sintering temperature resulted in increase in percentage shrinkage of extruded rods and pressed discs from 6.6 % to 11.3 %. Scratch hardness of the extruded rod sample is around 8.5 whereas hardness values of slip cast sample is around 8 on Mohs scale. A simple method has been developed to obtain porous ceramic for thermal insulation purpose of furnaces upto 1600 °C. Porous block made has thermal conductivity value of 0.33 Wm-1K-1 and the density of 0.7 gm/cm3.
Publication Details
Page(s) 228-232
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 31, Issue: 2, Year: 2009

Request the full text from PASTIC

0

Citations

0

Downloads

105

Views