Fissure formation Mechanism of Kaori aromatic rice under different drying and post-drying conditions was investigated by differential scanning calorimetry (DSC). Samples dried at 50oC and 60oC to standard and low final moisture content (FMC), the maximum fissuring rate occurred after approximately 12 h. Increasing difference between storage and drying air temperatures increased fissured kernels. The mean value of glass transition temperatures (Tg) showed that to achieve a FMC up to 12% and 9%, the temperature must be below 45oC and 52oC, respectively. Drying temperatures higher than these are likely to produce a high proportion of fissured kernels. The DSC diagram indicated that at the onset of drying, kernels state changed from a glassy to a rubbery and during the drying it returned to the glassy state. Therefore fissured kernels at low FMC was approximately 10% more than standard FMC. It can be concluded that a high drying temperature might have a more negative effect than low FMC on the structure of Kaori aromatic rice and leads to deterioration in its quality.