No Detail Found!

Thermal and thermo-mechanical behavior of butyl based rubber exposed to silicon oil at elevated temperature.

Author(s)
Shaukat Ali National Engineering and Scientific Commission, Islamabad, Pakistan
Sadaf Ramzan National Engineering and Scientific Commission, Islamabad, Pakistan
Ramsha Raza National Engineering and Scientific Commission, Islamabad, Pakistan
Fiaz Ahmed National Engineering and Scientific Commission, Islamabad, Pakistan
Shafiqullah Department of Chemistry, Quaid-e-Azam University, Islamabad, Pakistan
Rizwan Hussain National Engineering and Scientific Commission, Islamabad, Pakistan
Saqib Ali Department of Chemistry, Quaid-e-Azam University, Islamabad, Pakistan
Abstract
Silica reinforced rubbers are used as chemical resistant seals at high temperature. In this study the effect of alkali and silicon oil on the thermal and thermo-mechanical properties of the silica reinforced butyl rubber exposed as an interface between two liquid media at elevated temperature is investigated. Rubber bladder containing alkaline solution was immersed in silicon oil at 195±5oC for multiple cycles and loss in its thermal, thermo-mechanical and mechanical properties were studied by TGA, DMA and Tinius Olsen Testing Machine supported by FTIR and Optical microscopy. It was observed that the thermal and thermo-mechanical properties of butyl rubber were negatively affected due to leaching out of silica filler embedded in an organic matrix at elevated temperature. The thermal stability of exposed rubber was decreased around 200oC and the loss of storage modulus was observed up to 99.5% at -59oC.
Publication Details
Page(s) 1439-1446
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 35, Issue: 6, Year: 2013

Request the full text from PASTIC

0

Citations

0

Downloads

112

Views