No Detail Found!

Synthesis of Bio-Adsorbent for Removal of Fluoride from Groundwater - A Column Study

Author(s)
Mariam Mir Memon Department of Chemical Engineering, Mehran University of Engineering and Technology,Jamshoro,Pakistan
Muhammad Idress Memon Department of Chemical Engineering, Mehran University of Engineering and Technology,Jamshoro,Pakistan
Hafeez-ur-Rehman Department of Chemical Engineering, Mehran University of Engineering and Technology,Jamshoro,Pakistan
Muhammad Suleman Memon Department of Chemical Engineering, Mehran University of Engineering and Technology,Jamshoro,Pakistan
Khan Muhammad Qureshi Department of Chemical Engineering, Mehran University of Engineering and Technology,Jamshoro,Pakistan
Khadija Qureshi Department of Chemical Engineering, Mehran University of Engineering and Technology,Jamshoro,Pakistan
Imran Nazir Unar Department of Chemical Engineering, Mehran University of Engineering and Technology,Jamshoro,Pakistan
Abstract
High fluoride levels in ground water used for drinking have caused health concerns for millions of people across the world. Pakistan is one of the countries that have been contaminated by these toxins. However, a little amount of lfuoride is required for tooth and bone strength. In any event, the presence of too much of it in drinking water can cause diseases in both people and animals. This study is focused on the synthesis of bio-adsorbent bone char to adsorbent for the removal of fluoride from groundwater obtained from Islamkot district Tharparkar. The bone char was synthesized by pyrolysis of used cow bones at temperature 550?C. The fluoride removal eficiency of bone char was optimized. The impacts of diferent operating parameters such as flow rates (5mL/min, 10mL/min and 15mL/min), bed height of adsorbent (2cm, 4cm and 6cm), initial fluoride concentration 7.85 mg/L, and contact time (30min, 60min, and 90min) were studied. The removal eficiency was enhanced by increasing the adsorbent bed height and decreasing contact time, and flow rate. With an initial concentration of fluoride 7.85mg/L, the maximum removal eficiency of 90.2% was obtained when the adsorbent bed height, flow rate and contact time were optimized to 6 cm, 5 mL/min and 30min, respectively. The finding showed that bone char can be used as an eco-friendly, inexpensive, and eficient adsorbent for removing fluoride from groundwater.
Publication Details
Page(s) 91-97
Published Journal: Quaid-e-Awam University Research Journal of Engineering, Science and Technology, Volume: 19, Issue: 2, Year: 2021

Request the full text from PASTIC

Keywords
Fluoride, Groundwater, adsorption eficiency, column study, Bone char
0

Citations

0

Downloads

31

Views