No Detail Found!

IMPACT OF ADVANCED AND DELAYED IRRIGATION PRACTICES ON PHYSICO- CHEMICAL ATTRIBUTES OF POTATO TUBERS UNDER BED SOWING

Author(s)
M. S. Waqas Soil Conservation Group, Agriculture Department (Field Wing), Government of the Punjab,Rawalpindi ,Pakistan
M. J. M. Cheema Faculty of Agricultural Engineering and Technology, Pir Mehr Ali Shah Arid Agriculture University,Rawalpindi 46000,Pakistan
S. Hussain Department of Irrigation and Drainage, University of Agriculture, Faisalabad , Pakistan;Department of Biological and Agricultural Engineering, University of California, Davis CA , USA
A. Daccache Department of Biological and Agricultural Engineering, University of California,Davis CA 95616,USA
M. K. Ullah Civil Engineering Department, The University of Lahore,Lahore ,Pakistan
M. M. Iqbal Water Management Training Institute (WMTI), Agriculture Department, Government of the Punjab, Lahore Pakistan
H. Hussain Government Graduate College Khurrianwala, Faisalabad , Pakistan;Department of Chemistry, Quaid-I-Azam University, Islamabad, Pakistan
Abstract
The wise use of water resources is the dire need of the day due to the alarming situation of water crisis. Management Allowed Depletion (MAD) level irrigation technique is used to enhance crop yield as well as the precise use of water. The present study was designed to investigate the optimum MAD level (when to irrigate) at which tuber yield and quality did not deteriorate significantly. Four different MAD levels were scheduled i.e., irrigation applied when MAD0 = 0%, MAD20 = 20%, MAD35 = 35%, and MAD50 = 50% of available soil water depleted from the soil at Water Management Research Center, University of Agriculture, Faisalabad-Pakistan during the two successive winter growing seasons (2014-15 and 2015-16). Data of different physico-chemical properties and yield of potato tubers were gathered under the Randomized Complete Block Design (RCBD) and set into standard statistical techniques. Results revealed that physical parameters (i.e., length, thickness, diameter, weight, and actual volume) of potato tubers were significantly affected by the different MAD levels, while MAD35 was at par with other irrigation schedules. Different MAD levels didn t show significant effects onsome of the physico-chemical properties (i.e., particle density, porosity, specific gravity, tuber starch content, and total soluble solids) of potato tubers, and revealed that these traits are entirely genetic based. While tuber size percentage and yield are significantly affected by the different MAD levels. The maximum yield (i.e., 15.52, 16.76 in tons acre-1) and crop water productivity (i.e., 14.19 and 14.64 in kg m-3) were also observed at MAD35 during both years. In nutshell, results revealed that both advanced and delayed irrigation practices severely affect the physical parameters, yield as well as to some extent physico-chemical traits of potato tubers. Therefore, 35% MAD level schedule is the optimum one and recommended for potato cultivation under bed sowing.
Publication Details
Page(s) 705-720
Published Journal: Journal of Animal and Plant sciences, Volume: 32, Issue: 3, Year: 2022

Request the full text from PASTIC

Keywords
drip irrigation, Starch content, Horticultural crops, Specific gravity, Management allowed depletion, irrigation scheduling
0

Citations

0

Downloads

91

Views