No Detail Found!

Fabrication and Analysis of a Triple Band Patch Antenna

Author(s)
Gulzar Ahmad Department of Electrical Engineering, University of Engineering and Technology,Peshawar,Pakistan
Asif Sultan Department of Electrical Engineering, University of Engineering and Technology,Peshawar,Pakistan
M. Inayatullah Khan Babar Department of Electrical Engineering, University of Engineering and Technology,Peshawar,Pakistan
Majid Ashraf Department of Electrical Engineering, University of Engineering and Technology,Peshawar,Pakistan
Tariqullah Jan Department of Electrical Engineering, University of Engineering and Technology,Peshawar,Pakistan
Abstract
The paper presents the design and fabrication of a patch antenna of hexagonal shape on FR-4 lossy substrate of 1.6mm thickness. To achieve multi bands an inverted C-Shaped cut was etched in the patch. The antenna has over all dimensions of 61×48×1.6mm3. Microstrip line feed has been used for the excitation purpose of the antenna. Measurements of Return Loss (RL), Voltage Standing Wave Ratio (VSWR) and Input Impedance were taken using Vector Network Analyzer (VNA) of Rohde & Schwarz Company. The antenna offered three bands with resonant frequencies of 3.36GHz, 4.06GHz and 7.01GHz lying in S and C bands. The -10dB bandwidths achieved are 60MHz (3.340GHz-3.400GHz), 76MHz (4.033GHz-4.109GHz) and 754MHz (6.391GHz-7.145GHz) with corresponding return losses of 20.23dB, 16.30dB and 25.24dB respectively. VSWR of the antenna for all the above mentioned three bands remains below 2. The antenna can be used for different military and commercial applications in S and C bands.
Publication Details
Page(s) 45-51
DOI DOI not available
Published Journal: Proceedings of the Pakistan Academy of Sciences: A. Physical and Computational Sciences, Volume: 55, Issue: 3, Year: 2018

Request the full text from PASTIC

Keywords
Triple Band, Patch Antenna, FR-4, Vector Network Analyzer, Microstrip Line Feed
0

Citations

0

Downloads

180

Views