The current work focused on the possibility of using Chara algae and algae ashes from the Khirisan River in Diyala Governorate as biosorbent material to remove copper and lead ions from prepared aqueous solutions. Batch biosorption experiments were carried out using Chara algae and its ashes as a biosorbent for metal removal to determine optimum biosorption conditions such as pH, different initial concentration for metal ions, amount of the biosorbent material, contact time of biosorbent with metal ions, and temperature. Maximum adsorption uptakes were 93% for lead and 88% for copper at pH 5 and 5.5, respectively. Varying initial metal concentrations (from 20 to 80 ppm) and varying amount of biosorbent were investigated. Removal of the metal ions with high efficiency depends on the pH, and these removals came in order lead > copper. Using FTIR shows that carboxylic group of alginate present in the algae attaches to the metal ions leading to most of the adsorption process. Current study showed that it is possible to use cheap and available in large quantities, Chara algae, to remove toxicity from the effluent stream of any industry. The practical results showed that the time required for adsorption was short, exothermic nature of biosorption process, best pH and high affinity for metal ions was found.