No Detail Found!

Investigation onto the effect of Surface Etching using Chemical Etchants on the Dye-Ability of UHMWPE Fibre

Author(s)
Salma Farooq Department of Textile Engineering, NED University of Engineering and Technology, Karachi, Pakistan
Fareha Asim Department of Textile Engineering, NED University of Engineering and Technology, Karachi, Pakistan
Sheraz Hussain Siddique Department of Textile Engineering, NED University of Engineering and Technology, Karachi, Pakistan
Saira Faisal Department of Textile Engineering, NED University of Engineering and Technology, Karachi, Pakistan
Abstract
Ultra high molecular weight fibre cannot be dyed using conventional dyeing techniques as they are extremely hydrophobic and do not possess any polar groups. Wet etching of the surface was used as the pre-treatment process to improve the dyeability of the Ultrahigh Molecular Weight Polyethylene (UHMWPE) knitted fabric using potassium dichromate and sulphuric acid as etchants. The surface modified fabric was dyed at 130°C using High Temperature (HT) dyeing technique with disperse dye and evaluated in terms of Colour Strength (K/S), washing fastness, rubbing fastness, and tenacity. It has been observed that wet etching improved the colour strength substantially with an overall good fastness to washing and rubbing but the tenacity decreased with an increase in etching time.
Publication Details
Page(s) 842-846
DOI DOI not available
Published Journal: Mehran University Research Journal of Engineering and Technology, Volume: 40, Issue: 4, Year: 2021

Request the full text from PASTIC

Keywords
Surface modification, Dyeing, Fastness Properties, Ultrahigh Molecular Weight Polyethylene, Chemical etching
0

Citations

0

Downloads

61

Views