No Detail Found!

Study of shear strength of rocks from Kohat Formation.

Author(s)
Sher Bacha Department of Mining Engineering, University of Engineering and Technology, Peshawar, Pakistan
Noor Mohammad Department of Mining Engineering, University of Engineering and Technology, Peshawar, Pakistan
Muhammad Tahir Department of Mining Engineering, University of Engineering and Technology, Peshawar, Pakistan
Abstract
Shear strength plays a vital role in the designing of mining and civil structures within or on the rocks. The shear strength parameters can be determined either through direct or indirect methods. Many mining and civil structures have been constructed and many are under consideration in the area comprising limestone. Shear strength of the rocks in the study area has been determined using indirect methods previously. However it is extremely necessary to apply direct methods for comparison purposes. In this study shear strength of Kohat limestone was determined from direct method using shear box apparatus. Tests were carried out under Constant Normal Load Condition (CNL). Nine samples were tested under normal load condition up to 0.020% of uniaxial compressive strength. Barton Model was fitted to laboratory test data. Joint Wall Roughness Coefficient (JRC) was obtained from the impression of joint wall roughness and compared with Barton standard profiles. Since these were fresh joints therefore Uniaxial Compressive Strength (UCS) was used as Joint Wall Compressive Strength (JCS). JRC and JCS values were same for all the samples. Microsoft Excel built in optimization tool so called “Solver” was used to optimize the basic friction angle. Analysis of the results was compared with indirect method for determination of the said parameter. It was observed that the frictional angle determined for Kohat limestone using direct method is close to that from indirect methods but the later is on higher side.
Publication Details
Page(s) 123-130
DOI DOI not available
Published Journal: Journal of Himalayan Earth Sciences, Volume: 47, Issue: 1, Year: 2014

Request the full text from PASTIC

0

Citations

0

Downloads

35

Views