No Detail Found!

Electrochemical Characterization of PVD Coated AlTiN Coating on Stainless Steel Substrate for Biomedical Implant

Author(s)
M. U. Manzoor Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
A. Salman Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
H. Sajjad Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
A. Farooq Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
T. Ahmad Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
M. Kamran Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
H. Zafar Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
F. Hussain Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
F. Riaz Department of Metallurgy & Materials Engineering, College of Engineering & Emerging Technologies, Quaid-e-Azam Campus, University of the Punjab, 54590. Lahore, Pakistan
Abstract
Physical Vapor Deposition technology is an established technique to deposit metallic and ceramic coatings on different metallic substrates. Lateral Arc Rotating Cathode (LARC) technology has an added advantages of better mechanical uniform coating, consistent erosion of the electrodes and greater degree of ionization. LARC technology was used to deposit AlTiN coating on stainless steel SS 316L samples. The electrochemical behavior of the coating and the substrate was investigated using Electrochemical Impedance Spectroscopy (EIS) technique. Ringer Lectate solution was used as a simulated body fluid at 35 ± 2oC. The coating and substrate were characterized by Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDX) and Surface Profilometry. The Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy analysis revealed a consistent coating as a whole. The surface profilometry showed lower surface roughness after the coating. The Electrochemical Impedance Spectroscopy tests indicated that corrosion resistance of the coated sample was better, than the uncoated substrate in the electrolyte solution for short duration (one day) and behaved like cathodically protected coating and showed more resistivity. However, the Electrochemical Impedance Spectroscopy results varied because of the penetration of chlorite ions through the porosity in th coating and reaction with the coating material after the prolonged insertion.
Publication Details
Page(s) 9-14
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 48, Issue: 2, Year: 2020

Request the full text from PASTIC

Keywords
Electrochemical Impedance Spectroscopy, Corrosion resistance, AlTiN Coating, Physical Vapor Deposition Coating, Scanning Electron Microscopy
0

Citations

0

Downloads

32

Views