No Detail Found!

Extraction of Gold From Boulangerite Ore Using Sodium Cyanide

Author(s)
S. Ali Materials Research Laboratory, Department of Physics, University of Peshawar,Pakistan
A. Ahmad Materials Research Laboratory, Department of Physics, University of Peshawar,Pakistan
M. Hashim Materials Research Laboratory, Department of Physics, University of Peshawar,Pakistan
Y. Iqbal Materials Research Laboratory, Department of Physics, University of Peshawar,Pakistan
Abstract
Present study focuses over the extraction of gold via sodium cyanide (NaCN) from boulangerite ore. Since the presence of antimony hinders the extraction of gold by cyanidation therefore, the ore was first treated with sodium sulphide (Na2S) and sodium hydroxide (NaOH) to remove/minimize the antimony content. Gold extraction via cyanidation was then studied for different parameters including concentration of NaCN, time effect and influence of temperature on leaching of gold. It was observed that extraction of gold increases with increase in concentration of NaCN and ore amount. Maximum leaching of gold (52.89 - 76.53 %) was carried out at 80 oC, 100 minutes leaching time, 300 rpm and a pH level of 10.5.
Publication Details
Page(s) 1-7
DOI DOI not available
Published Journal: Journal of Pakistan Institute of Chemical Engineers, Volume: 47, Issue: 2, Year: 2019

Request the full text from PASTIC

Keywords
Extraction, sodium cyanide, boulangerite ore, hydrometallurgy
0

Citations

0

Downloads

65

Views