No Detail Found!

Separation of Ti(IV) and Fe(III) from aqueous sulphate solution by cyanex 272 [Bis(2,4,4-Trimethylpentyl) phosphinic acid] in kerosene.

Author(s)
R. K. Zoardar Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
M. S. Rahman Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
D. A. Begum Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
M. F. Islam Department of Applied Chemistry and Chemical Technology, University of Rajshahi, Rajshahi, Bangladesh
Abstract
Extraction and separation of Ti(lV) and Fe(III) from aqueous sulphate solution by Cyanex 272 [bis(2,4,4-trimethylpentyl) phosphinic acid] in kerosene was investigated. Extraction of Ti(IV) and Fe(lll) increased with the increase of extractant concentration and decreased with the increase of aqueous phase acidity. About 95% Ti(IV) and 24% Fe(III) was extracted with 0.20 M Cyanex 272 and 0.25 M H2SO4. It was thought that Fe(III) was extracted in the organic phase by the formation of the species Feq or Feq(HA), and Ti(IV) as TiO.A,. Data shows that Cyanex 272 can be used as a very effective extractant for Ti(IV) extraction from ilmenite leach solution at high acidity showing large separation coefficient for Ti(IV) fiom [Ti(IV) and Fe(III)] mixture. The maximum separation factor (S=l16.50) was obtained at moderate acidity (0.90 M H2SO4) with high extractant (0.20 M Cyanex 272) concentration. The experimental data aIso suggested that the extraction of Ti(IV) and Fe(IlI) by Cyanex 272 did not folIow simple extraction mechanism for all the acid ranges. It is IikeIy that solvation mechanism may be operative at high acidity of the aqueous phase.
Publication Details
Page(s) 231-238
DOI DOI not available
Published Journal: Pakistan Journal of Scientific and Industrial Research, Volume: 52, Issue: 5, Year: 2009

Request the full text from PASTIC

0

Citations

0

Downloads

65

Views