No Detail Found!

Experimental study on assessment of different quality parameters for different brands of cement available in local market

Author(s)
Syed Nasir Abbas Departmenof Civil Engineering, College of Engineering and Technology, University of Sargodha, Sargodha, Pakistan
Muhammad Haris Departmenof Civil Engineering, College of Engineering and Technology, University of Sargodha, Sargodha, Pakistan
Muhammad Ahmad Jamil Departmenof Civil Engineering, College of Engineering and Technology, University of Sargodha, Sargodha, Pakistan
Haris Rashid Departmenof Civil Engineering, College of Engineering and Technology, University of Sargodha, Sargodha, Pakistan
Shehzad Niazi Departmenof Civil Engineering, College of Engineering and Technology, University of Sargodha, Sargodha, Pakistan
Nabeel Hasan Departmenof Civil Engineering, College of Engineering and Technology, University of Sargodha, Sargodha, Pakistan
Abstract
Cement is the most important binder used in the structure of all kinds that makes cement a necessity in construction. So it's an important job to find out which brand of OPC is right for the desired job. The purpose of this research is to measure the quality parameters of different brands of Portland cement available in Sargodha while keeping the physical conditions constant. There are many types of cement available in the market from which only Portland cement falls under the scope of this document. In the market of Sargodha, a lot of brands are dealing in Portland cement out of which only 5 brands (Bestway, Maple Leaf, DG, Flying Pakistan, and Pioneer) were used to assess the quality parameters of Portland cement. The selection of brands for Portland cement was done on the basses of ease of availability in the local market. The adopted method to assess the quality parameters of Portland cement was 5 tests of cement (compressive strength test, consistency test, fineness test, soundness test, setting time test), while 2 tests of cement (heat of hydration and chemical composition test ) are recommended for future work by students. DG gained the highest compressive strength (20.79 MPa) after 28 days and it also turned out to be the most consistent cement (for 10 mm penetration in 30 sec). Bestway is the finest of all the brands (98% fineness) with an initial setting time of 100 minutes. To give recommendations, the results of the test performed and the study may provide useful insight and guidelines about the best brand of Portland cement.
Publication Details
Page(s) 131-138
DOI DOI not available
Published Journal: Science International, Volume: 32, Issue: 1, Year: 2020

Request the full text from PASTIC

Keywords
Compressive Strength, Maple Leaf, Bestway, fineness test, brands of cement, soundness test, DG Cement
0

Citations

0

Downloads

127

Views