No Detail Found!

Parametric Analysis of the Mulching Depth of Oil Palm Fronds Achieved by Tractor Operated Mulcher

Author(s)
Bala Gambo Jahun Department of Agricultural and Bioresource Engineering Abubakar Tafawa Balewa University,PMB 0248, Bauchi State,Nigeria; Department of Biological and Agricultural Engineering,Universiti Putra Malaysia 43400 Serdang, Selangor Darul Ehsan,Malaysia
Muhammad Yamin Department of Biological and Agricultural Engineering, Universiti Putra Malaysia 43400 Serdang, Selangor Darul Ehsan, Malaysia; Faculty of Agricultural Engineering and Technology, University of Agriculture, Faisalabad 38000, Pakistan
Desa Bin Ahmad Department of Biological and Agricultural Engineering,Universiti Putra Malaysia 43400 Serdang, Selangor Darul Ehsan,Malaysia
Muhammad Razif Mahdi Department of Biological and Agricultural Engineering,Universiti Putra Malaysia 43400 Serdang, Selangor Darul Ehsan,Malaysia
Shamsuddin Suleiman Department of Mechanical and Manufacturing Engineering,Universiti Putra Malaysia 43400, Serdang, Selangor Darul Ehsan,Malaysia
Salihu Ahmad Abdulkadir Department of Agricultural Engineering,Adamawa State Polytechnic Yola,Nigeria
Abstract
| Pruning produces large quantities of waste from oil palm fronds (OPFs). During mulching of oil palm fronds, lifting angles of mulcher's blades afect the mulching depth and may damage the shallow roots of oil palms. This study investigates the influence of blade lifting angles, tractor's forward speed and tractor's PTO speed in predicting mulching depth. Four blades with lifting angles of 0°, 60°, 120°, and 150°; 02 tractor's PTO speeds of 540 and 1000 RPM and 03 tractor's forward speeds of 1, 3, and 5 km/h were assessed for determining the effect on mulching depth in oil palm plantation. The results show that about 79 % of the mulching depth variance is explained by blade lifting angles, tractor's forward speed and tractor's PTO speed. Blade lifting angle of 120° at tractor's PTO speed of 1000 RPM and tractor's forward speed of 5 km/h ofered the most suitable mulching depth of 14.10 cm. Tractor's PTO speed was a major predictor of mulching depth in an oil palm plantation. Thus prescribed blade lifting angle and tractor's forward speed must be adjusted for the attainment of shallow mulching depth. This will minimize the damage to the roots of oil palm while mulching oil palm fronds. Moreover, the developed multiple linear regression model can further be used for the adjustment of blade lift angles and tractor's speed to achieve the required mulching depth during the field maintenance, replanting and access operation.
Publication Details
Page(s) 632-638
DOI DOI not available
Published Journal: Sarhad Journal of Agriculture, Volume: 36, Issue: 2, Year: 2020

Request the full text from PASTIC

Keywords
Oil palm fronds, Tractor’s forward speed, Blade lifting angles, Mulching depth, Tractor’s PTO speed
0

Citations

0

Downloads

118

Views