No Detail Found!

Determination of spray angle and flow uniformity of spray nozzles with image processing operations.

Author(s)
N. Çetin Department of Biosystems Engineering, Faculty of Agriculture, University of Erciyes,38039 Kayseri,Turkey
C. Sa lam Department of Biosystems Engineering, Faculty of Agriculture, University of Erciyes,38039 Kayseri,Turkey
B. Demir Department of Mechanicaland Metal Technologies, Vocational School of Technical Sciences, University of Mersin,33343 Mersin,Turkey
Abstract
This study was conducted to determine the spray angle and flow uniformity of different hydraulic spray nozzles at different spray pressures with the aid of image processing operations. Spray images were captured with a digital camera to determine spray angles and spray patterns. Captured images were transferred to computer environment and analyzed with different image processing software. The spray angle at 3 bar pressure was measured as 107.2º for anti-drift nozzles, as 105.6º for air-injection nozzles, as 69.9º for ST 80 flat-fan nozzles, as 84.0º for ST 90 flat-fan nozzles, as 103.2º for ST 110 flat-fan nozzles and as 54.2°for hollow-cone Ø1.0 mm nozzles. Cone angle at 3 bar pressure was measured as 106.7º for anti-drift nozzles, as 103.9º for air-injection nozzles, as 75.1º for ST 80 flat-fan nozzles, as 86.4º for ST 90 flat-fan nozzles, as 105.2º for ST 110 flat-fan nozzles and as 46.4º for hollow-cone Ø1.0 mm nozzles. Spray pattern obtained with the image processing method was identical with the flow uniformity obtained with line-profile method. It was concluded that spray pressures had significant effects on spray angles (p d0.05) of all nozzles.
Publication Details
Page(s) 1603-1615
DOI DOI not available
Published Journal: Journal of Animal and Plant sciences, Volume: 29, Issue: 6, Year: 2019

Request the full text from PASTIC

Keywords
Image Processing, pressure, Cone angle, spray angle, spray pattern
0

Citations

0

Downloads

150

Views