No Detail Found!

Numerical Analysis of Top Coal Recovery Ratio by using Discrete Element Method.

Author(s)
Niaz Muhammad Shahani School of Mines, China University of Mining and Technology,Xuzhou, Jiangsu, P.R, China
Zhijun Wan .School of Mines, China University of Mining and Technology,Xuzhou, Jiangsu, P.R, China
Li Guichen School of Mines, China University of Mining and Technology,Xuzhou, Jiangsu, P.R, China
Fahad Irfan Siddiqui Department of Mining Engineering, Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan
Abdul Ghani Pathan Department of Mining Engineering, Mehran University of Engineering and Technology, Jamshoro, Sindh, Pakistan
Peiju Yang School of Mines, China University of Mining and Technology,Xuzhou, Jiangsu, P.R, China
Sifei Liu School of Mines, China University of Mining and Technology,Xuzhou, Jiangsu, P.R, China
Abstract
There is a massive quantity of lignite coal reserves at the Thar Coalfield Pakistan which are demarcated through thick coal seams. To extract these thick coal seams, the chosen method for mining is Top Coal Caving. The Longwall Top Coal Caving (LTCC) has been one of the preferred underground mining methods that has been developed and then accepted by its guaranteed results in China's coal mining industryT.his paper discusses numerical modeling of top coal caving mining method and studies the coal recovery ratio by using discrete element method. In the modeling consequences, the total top coal recovery ratio was computed to be 83.9% when the top coal thickness was three times the cutting height with the drawing interval of 0.8m respectively. Based on this study, it is proposed that LTCC method can be adopted for the mining of thick coal seam(s) at Thar Coalfield.
Publication Details
Page(s) 26-35
DOI DOI not available
Published Journal: Journal of Engineering and Applied Sciences, Volume: 25, Issue: 2, Year: 2019

Request the full text from PASTIC

Keywords
top coal recovery ratio
0

Citations

0

Downloads

60

Views