This study mainly focused on the combustion mechanisms of natural gas (of major constituent were methane, ethane, etc) in an ice (Internal Combustion Engine). Both detailed and reduced mechanisms were implemented in CHEMKIN 4.1.1 for 0-D closed IC (Internal Combustion) engine module. In present study, two detailed (GRIMECH 3.0 and UBC MECH) and two reduced (One step and four step) kinetic mechanisms were tested on three engine geometries. The Combustion due to these mechanisms was characterized by plotting various parametric profiles like temperature, pressure and major species. Three mechanisms (4-setps, GRIMECH3.0, & USB MECH) successfully showed combustion while one step global mechanism was unable to predict any combustion reaction. Detailed mechanisms predicted the maximum pressure (atm) of 70, 40 and 30 for each of Designs I-III, respectively. The maximum chamber temperature with these mechanisms was predicted above 2000K. Four step reduced mechanism predicted maximum cylinder pressure of 90 atm for Design-II and III and 300 atm for Design-I. Maximum cylinder temperature was of 7000K for Design I and 5000 K for each of Design-II and III, respectively. GRIMECH successfully predicted the formation of pollutants like CO (Carbon Monoxide) and No1 while 4-step mechanism only predicted CO and unable to predict NO1 formation. Although, there were some discrepancies among the simulation results for each of the engine design but on the whole it can be concluded that GRIMECH3.O mechanisms was favorable and successfully predicted the pollutants formation during combustion In the IC engine chamber.