No Detail Found!

Influence of silane and heated silane on the bond strength of lithium disilicate ceramics - An in vitro study.

Author(s)
Tariq Abduljabbar Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia
Mohammed Ayedh Alqahtani Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia
Zaid Al Jeaidi Conservative Dental Science Department, College of Dentistry, Prince Sattam Bin Abdulaziz University, Al-Kharj, Saudi Arabia
Fahim Vohra Department of Prosthetic Dental Sciences, College of Dentistry, King Saud University, Riyadh, Saudi Arabia
Abstract
Objectives: To evaluate the effect of silane application and silane heat treatment on lithium-disilicate ceramic when bonded to composite resin. Methods: Twelve blocks of lithium-disilicate (LD) ceramic were fabricated and bonding surfaces were etched using 9.5% hydrofluoric acid (90 seconds). Three experimental groups resulted from the various surface treatment combinations, which included, no silane application (NS) (controls), silane application (S) and silane heat treatment (HS) (100°C for 5 minutesutes). Ceramic and composite resin blocks were bonded using an adhesive resin and light cured restorative composite as a luting agent, under standard conditions. A total of 90 specimen sticks (8 x 1mm²) were subjected to micro-tensile bond strength testing. The means of micro-tensile bond strength (µ-tbs) of the study groups were analyzed using t-test and ANOVA. The tested specimens were analyzed for mode of failure using scanning electron microscopy (SEM). Results: The highest µ-tbs value (42.6±3.70 MPa) was achieved for LD ceramics with heat-dried silane. Both silane application and heat treatment of silane resulted in significant (p
Publication Details
Page(s) 550-553
DOI DOI not available
Published Journal: Pakistan Journal of Medical Research, Volume: 55, Issue: 3, Year: 2016

Request the full text from PASTIC

0

Citations

0

Downloads

61

Views