No Detail Found!

Comparative study on the leaching characteristics of industrial sludge and fly ash using kslp and tclp techniques.

Author(s)
Byung-Keun Lee Gyeong Sang Bukdo Government Public Institute of Health & Envoironment, 1445-3, Sangyeok-dong, Bukgu, Daegu, South Korea
Hyeon-Wook Hwang Department of Environmental Engineering, Kyungpook National University, Daegu South Korea
Young-Ju Kim Department of Environmental Engineering, Kyungpook National University, Daegu South Korea
Tahir Imran Qureshi Department of Chemical Engineering, NFC Institute of Engineering and Technological Training, Multan, Pakistan
Abstract
Leaching characteristics of industrial sludge and fly ash using Korean Standard Leaching Procedure (KSLP) and Toxicity Characteristics Leaching Procedure (TCLP) were studied. Possibilities of re-adsorption of heavy metal ions on the surface of sludge and ash during the course of leaching were also investigated. KSLP looked relatively more aggressive than the TCLP in leaching heavy metal ions. Concentrations of metal ions leached in both the methods, however, were found very low in comparison to the concentration of ions present in the original samples. In case of sludge, heavy metal ions showed relatively high rate of leaching at 4th  and 5th  stages of sequential extraction while ash showed high rate of leaching at the first three stages of extraction. Some of the concentrations of heavy metal ions leached out in the tests also found to be adsorbed on the surface of sludge and ash. Heavy metal ions present in high concentrations in the sample showed lower rate of adsorption than their leaching rate. No distinct difference in the results of KSLP and TCLP was observed. However, variations in the leaching results could be due to the different nature of hazardous waste and leaching conditions. More information like kinetics of leaching, mineralogical characteristics of waste and site characteristics of landfill were required to predict more accurate leaching behavior of ions in natural conditions.
Publication Details
Page(s) 638-643
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 32, Issue: 5, Year: 2010

Request the full text from PASTIC

0

Citations

0

Downloads

78

Views