No Detail Found!

Optimization of encapsulated clove oil particle size with biodegradable shell using design expert methodology.

Author(s)
Mohammad Hassan Shahavi Nanotechnology Research Institute, Faculty of Chemical Engineering, Babol Noshirvani University of Technology, Babol, Iran
Morteza Hosseini Nanotechnology Research Institute, Faculty of Chemical Engineering, Babol Noshirvani University of Technology, Babol, Iran
Mohsen Jahanshahi Nanotechnology Research Institute, Faculty of Chemical Engineering, Babol Noshirvani University of Technology, Babol, Iran
Ghasem Najafpour Darzi Nanotechnology Research Institute, Faculty of Chemical Engineering, Babol Noshirvani University of Technology, Babol, Iran
Abstract
To protect clove oil from volatilization and oxidation, encapsulation in nano scale by biocompatible polymers via ultrasonication emulsification was performed. In order to define an optimal particles size of encapsulated clove oil, a novel crossed experimental design, including mixture design along with the clove oil concentration as process parameter was employed. For this purpose, 28 different formulas by combination of both mixture and process factors were prepared. The encapsulated shell having fixed composition of mixture (20 %): Arabic gum (0-20 %, w/w), whey protein concentrate (0-20 %, w/w) and Tween 80 (0-4 %, w/w) was used. Moreover, the effect of variable content of clove oil (2 to 10 %, w/w) as a core of particles and the remaining of blending is Milli-Q water was investigated. Particles size of all samples, were characterized by dynamic light scattering. Analysis of variance was preformed to analyze experimental data while using stepwise regression analysis. The developed models from the Based on experimental design necessary models were developed; the model having high coefficient of determination (R2=0.995) value; also predicted and fitted well with the experimental data. Finally, from the optimal encapsulating condition obtained particles size of encapsulated of clove oil (128.2 ± 4.3 nm) that was close to predicted value (135.7 nm).
Publication Details
Page(s) 149-160
DOI DOI not available
Published Journal: Pakistan Journal of Biotechnology, Volume: 12, Issue: 2, Year: 2015

Request the full text from PASTIC

0

Citations

0

Downloads

55

Views