No Detail Found!

Study of zinc leaching of EAF flue dust using sodium hydroxide.

Author(s)
Ahsan Abdul Ghani Department of Chemical Engineering, University of Karachi, Karachi, Pakistan
Junaid Saleem Department of Chemical Engineering, University of Karachi, Karachi, Pakistan; Department of Mechanical Engineering, DHA Suffa University, Karachi, Pakistan
Zeeshan A Hameed Department of Quality Assurance, Peoples Steel Mills Ltd, Karachi, Pakistan
Hira Lal Department of Chemical Engineering, University of Karachi, Karachi, Pakistan
Muhammad Shoaib Department of Chemical Engineering, University of Karachi, Karachi, Pakistan
Abstract
During the production of steel from Electric Arc Furnace (EAF), large amount of by-product called EAF flue dust is generated. The major proportion of flue dust is comprised of Zn (41.5 % wt.). Different phases identified by XRD analysis are zincite, franklinite and magnetite with zincite being dominant. In this study, we have performed flue dust treatment using sodium hydroxide as leaching medium. Different concentrations of alkali were used to optimize maximum recovery of Zn. XRF and Wet Chemical method were used to characterize the dust samples both before and after leaching. The optimum alkali concentration for selective leaching of zinc was found to be 4 M with a zinc recovery of 90 %.
Publication Details
Page(s) 33-37
DOI DOI not available
Published Journal: Pakistan Journal of Analytical & Environmental Chemistry, Volume: 17, Issue: 1, Year: 2016

Request the full text from PASTIC

0

Citations

0

Downloads

44

Views