No Detail Found!

Coke suppression by Holmium promoter in dry reforming of Methane.

Author(s)
A. H. Fakeeha Chemical Engineering Department, College of Engineering, King Saud University. P.O. Box 800, Riyadh 11421, Kingdom of Saudi Arabia
M. A. Naeem Chemical Engineering Department, College of Engineering, King Saud University. P.O. Box 800, Riyadh 11421, Kingdom of Saudi Arabia
A. E. Abasaeed Chemical Engineering Department, College of Engineering, King Saud University. P.O. Box 800, Riyadh 11421, Kingdom of Saudi Arabia
A. A. Ibrahim Chemical Engineering Department, College of Engineering, King Saud University. P.O. Box 800, Riyadh 11421, Kingdom of Saudi Arabia
W. U. Khan Chemical Engineering Department, College of Engineering, King Saud University. P.O. Box 800, Riyadh 11421, Kingdom of Saudi Arabia
Ahmed Sadeq Al Fatesh Chemical Engineering Department, College of Engineering, King Saud University. P.O. Box 800, Riyadh 11421, Kingdom of Saudi Arabia
Abstract
The present research mainly focused on the development of highly coke resistant catalysts. In this context, Ni/ZrO2 novel catalysts with holmium (Ho) promoter were prepared using the polyol method and investigated, for CH4-CO2 reforming, at atmospheric pressure in the temperature range of 500–700 °C. For each catalyst, the Ni loading was fixed at 5 wt.%, while Ho loading was varied from 0.0–1.5 wt.%. Various techniques such as BET, H2-TPR, CO2-TPD, XRD, TGA and FESEM were used to characterize the prepared catalysts. The results demonstrated that the addition of Ho in Ni/ZrO2 catalyst had a notable effect on carbon suppression. Moreover, CO2-TPD results revealed that the incorporation of Ho in Ni/ZrO2 catalyst fairly enhanced its Lewis basicity. These improvements in basicity favored the chemisorption and activation of CO2 over the catalyst surface which in turn minimized coke deposition. Carbon deposition on the 1.5 wt.% Ho promoted catalyst (Ni-1.5Ho-Zr) was reduced about 92.7% compared to the un-promoted catalyst.
Publication Details
Page(s) 388-397
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 38, Issue: 3, Year: 2016

Request the full text from PASTIC

0

Citations

0

Downloads

77

Views