The Thesis Remedial Measures for designing the earthing system of 500 KV grid station provides the method for designing the earthing system as well as causes and effects of failure of earthing and its remedial measures. During designing the earthing system for electrical system, a suitable neutral earth arrangement must be selected. The Neutral can either be isolated or can either be connected to earth. The electrical system capacitance must be such that an earth fault current is not likely to endanger for personal or for equipment. Protection against over voltages be ensured by simple current relaying. It provides a simple reliable selective means of protection by calculating the earthing resistance and remedial measures. A substation is part of a system and not an entity to itself. Normally, a power system is designed so that the effects of an outage (caused by the failure of a single component such as a transformer, transmission line, or distribution line) will result in minimal interruption of service and affect the fewest customers possible. Failure of one component in a system often forces a greater than normal load to be carried by other components of the system. Such contingencies are normally planned for and incorporated into design criteria.