No Detail Found!

Modeling of a Nickel-based Fluidized Bed Membrane Reactor for Steam Methane Reforming Process.

Author(s)
Mustafa Kamal Pasha Dept. of Chemical Engineering, School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST), H. 12, Islamabad
Iftikhar Ahmad Dept. of Chemical Engineering, School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST), H. 12, Islamabad
Jawad Mustafa Dept. of Chemical Engineering, School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST), H. 12, Islamabad
Manabu Kano Dept. of Systems Science, Kyoto University, Yoshida-Honmachi, Sakyo-ku, Kyoto, Japan
Abstract
Summary: Hydrogen being a green fuel is rapidly gaining importance in the energy sector. Steam methane reforming is one of the most industrially important chemical reaction and a key step in the production of high purity hydrogen. Due to inherent deficiencies of conventional reforming reactors, a new concept based on fluidized bed membrane reactor is getting the focus of researchers. In this work, a nickel-based fluidized bed membrane reactor model is developed in the Aspen PLUS® process simulator. A user-defined membrane module is embedded in the Aspen PLUS® through its interface with Microsoft® Excel. Then, a series combination of Gibbs reactors and membrane modules are used to develop a nickel-based fluidized bed membrane reactor. The model developed for nickel-based fluidized bed membrane reactor is compared with palladium-based membrane reactor in terms of methane conversion and hydrogen yield for a given panel of major operating parameters. The simulation results indicated that the model can accurately predict the behavior of a membrane reactor under different operating conditions. In addition, the model can be used to estimate the effective membrane area required for a given rate of hydrogen production.
Publication Details
Page(s) 219-229
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 41, Issue: 2, Year: 2019

Request the full text from PASTIC

References
A. Adris, C. Lim, and J. Grace, The fluidized-bed membrane reactor for steam methane reforming: model verification and parametric study, Chem. Eng. Sci., 52, 1609 (1997
C. S. Patil, M. van Sint Annaland, and J. A. Kuipers, Design of a novel autothermal membrane-assisted fluidized-bed reactor for the production of ultrapure hydrogen from methane, Ind. Eng. Chem. Res., 44, 9502 (2005
A. Santucci, F. Borgognoni, M. Vadrucci, and S. Tosti, Testing of dense Pd-Ag tubes: Effect of pressure and membrane thickness on the hydrogen permeability, J Memb Sci, 444, 378 (2013).
K. Babita, S. Sridhar, and K. Raghavan, Membrane reactors for fuel cell quality hydrogen through WGSR-Review of their status, challenges and opportunities, Int. J. Hydrog. Energy, 36, 6671-6688 (2011).
J. R.Grace,X.Li,C. J.Lim, 2001.Equilibrium modelling of catalytic steam reforming of methane in membrane reactors with oxygen addition,Catal Today 64 -
Z.Chen,S. S.Elnashaie, 2004.Steady-state modeling and bifurcation behavior of circulating fluidized bed membrane reformer-regenerator for the production of hydrogen for fuel cells from heptane, Chem, 59 -
S.Yun,S. T.Oyama, 2011."Correlations in palladium membranes for hydrogen separation: a review,",J Memb Sci 375 -
A.Adris,C. J.Lim,J.Grace, 1994.The fluidized bed membrane reactor system: a pilot scale experimental study,Chem 49 -
A.Basile,F.Gallucci, 2010.Membranes for membrane reactors: preparation, optimization and selection, -
M. Wang , J.,Song , X.,Wu , X.,Tan , B.,Meng, 2016.Metallic nickel hollow fiber membranes for hydrogen separation at high temperatures,J Memb Sci 509 -
A.Unemoto,A.Kaimai,K.Sato,T.Otake,K.Yashiro,J.Mizusaki,T.Kawada,T.Tsuneki,Y.Shirasaki,and I. Yasuda, 2007.Surface reaction of hydrogen on a palladium alloy membrane under co-existence of H2O, CO, CO2 or CH4, Int,J. Hydrog. Energy 32 4023 -4029
Mahecha-Botero , T.,Boyd , A.,Gulamhusein , N.,Comyn , C. J.,Lim , J. R.,Grace , Y.,Shirasaki , and I. Yasuda, 2008.Pure hydrogen generation in a fluidized-bed membrane reactor: experimental findings,Chem 63 2752 -2762
N. D.Deveau,Y. H.Ma,R.Datta, 2013.law: a comprehensive microkinetic model of hydrogen permeation in dense metal membranes,J Memb Sci 437 298 -311
Palladium Price Today | Price of Palladium Per Ounce | 24 Hour Spot Chart | KITCO. [Online]. Available: http://www.kitco.com/charts/livepalladium.html. [Accessed: 28-Jan-2017]
NickelPrices and Nickel Price,Mine, ., 28 -
Sarvar-Amini , A.,Sotudeh-Gharehagh , R.,Bashiri , H.,Mostoufi , N.,Haghtalab , A., 2007.Sequential simulation of a fluidized bed membrane reactor for the steam methane reforming using Aspen Plus, 21 -
Ye , G.,Xie , D.,Qiao , W.,Grace , J.R.,Lim , C.J., 2009.Modeling of fluidized bed membrane reactors for hydrogen production from steam methane reforming with Aspen Plus, Int,J. Hydrog. Energy 34 -
0

Citations

0

Downloads

82

Views