No Detail Found!

Experimental Study on Comparison of Strength Properties of Natural Waste Fiber (Coir and Jute) Reinforced Concrete.

Author(s)
Syed Nasir Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Muhammad Ayoub Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Syed Zafar Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Ahmed Bilal Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Anwaar Hazoor Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Ehsanullah Kakar Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Aamir Mehmood Department of Civil Engineering, Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Abstract
For this study, natural waste fiber (coir and jute) were used as they are freely available in large quantities. The property of natural waste fiber (coir and jute) reinforced concrete was compared with conventional concrete based on experiments performed in the laboratory. The use of coir and jute fiber will also lead to better management of these natural waste fibers. Coconut and jute fibers were cut into desire length of 71.67 mm and 96.48 mm per aspect ratio of 75. 1:2:4 ratios concrete mix was produced which contains coir and jute fiber of 0.5, 1 and 1.5% by volume of concrete. Engineering properties such as workability, flexural strength and compressive strength of coir and jute fibers reinforce concrete specimens were determined following standard procedures at curing ages of 7, 14 and 28 days. The results showed that the workability decrease from increase of fibers, while the compressive strength increased up to 4.5% and flexural strength increased up to 5.9% but dropped afterwards when compared with conventional concrete.
Publication Details
Page(s) 105-110
DOI DOI not available
Published Journal: Journal of Applied and Emerging Sciences , Volume: 7, Issue: 2, Year: 2017

Request the full text from PASTIC

References
Ÿ BritishStandard, 1983.Method for determination of compressive strength of concrete cubes BS 1881-116: UK: BSI publications, -
Ÿ DomkePV., 2012.Improvement in the strength of concrete by using industrial and agricultural waste,IOSR Journal of Engineering 2 755 -759
Ÿ HasanNMS,SobuzHR,SayedMS,IslamMS, 2012.The Use of Coconut fibre in the Production of Structural Lightweight Concrete,Journal of Applied Sciences 12 831 -839
Ÿ MajidA,LiuA,ChouwN., 2012.Mechanical and Dynamic Properties of Coconut Fibre Reinforced Concrete,Construction and Building Materials 30 814 -825
Ÿ RamliM,KwanWH,AbasNF, 2013.Strength and durability of coconut-fibre-reinforced concrete in aggressive environments,Construction and Building Materials 38 554 -566
Ÿ Syed Nasir, 2017.Experimental Investigation of Natural Waste Fiber (Coir and Jute) Reinforced Concrete in Term of Compressive Strength and Workability,Paper presented at the Striving Towards Resilient Built Environment -
Ÿ YalleyPP,KhenKAS, 2009.Use of coconut fibre as an enhancement of concrete,Journal of Engineering and Technology 3 54 -73
ASTM International. (2003). Standard Test Method for Slump of Hydraulic-Cement Concrete C 143/C 143M – 03. United States
ASTM International. (2016). Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With CenterPoint Loading) C293/C293M − 16. United States.
0

Citations

0

Downloads

82

Views