No Detail Found!

Pyrolysis Heating Performance of Oil Palm Shell Waste Biomass with Carbon Surfaces.

Author(s)
Faisal Mushtaq Department of Chemical Engineering Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Muhammad Najam Khan Malghani Department of Chemical Engineering Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Muhammad Siddique Nasar Department of Chemical Engineering Balochistan University of Information Technology, Engineering and Management Sciences, Quetta, Pakistan
Ali Nawaz Mengal Department of Mechanical Engineering, Balochistan University of Information Technology, Engineering & Management Sciences (BUITEMS), Quetta, Pakistan
Ramli Mat Department of Chemical Engineering, Faculty of Chemical and Energy Engineering, University Technology Malaysia, UTM, Skudai, Johor Bahru, Johor Darul Tazim, Malaysia
Farid Nasir Ani Department of Thermodynamics and Fluid Mechanics, Faculty of Mechanical Engineering, University Technology Malaysia, UTM, Skudai, Johor Bahru, Johor Darul Tazim, Malaysia
Abstract
Bio-fuels from solid waste biomass have been projected to provide renewable energy for the future. The thermal conversion of waste biomass to bio-fuels requires the development of energy efficient and quick heating processes. For this reason, Microwave (MW) heating process has attracted great attention in achieving quick heating conditions. In this study, solid Oil Palm Shells (OPS) waste biomass was subjected to multimode MW pyrolysis system operated at 2.54 GHz frequency with coconut activated carbon (CAC) surfaces. The effects of increasing OPS loading were investigated at 300 W, 35 wt% CAC loading and 4 liter per minute (LPM) of N2 on pyrolysis heating performance, bio-oil yield and composition. The results indicated that increase in OPS loading provide slow heating of biomass solids. However, the final temperature reached in biomass solids were found encouraging in initiating pyrolysis conditions. 150g of OPS loading demonstrated quick and nearly uniform process heating compared to 175g and 200g OPS loading. The highest bio-oil yield of 31.76 wt% was obtained with 200g OPS loading. The phenols in the bio-oil detected remained 58.02-66.67 %GC-MS area. The findings of this study reveals that the heat generated from carbon surfaces and carried with N2 gas can improve pyrolysis heating conditions in OPS solids at fairly low MW power, which can save process energy. The high phenols in bio-oil suggest potential use as chemical feedstock in petrochemical industry.
Publication Details
Page(s) 70-75
DOI DOI not available
Published Journal: Journal of Applied and Emerging Sciences , Volume: 7, Issue: 1, Year: 2017

Request the full text from PASTIC

References
Ÿ BridgwaterA., 1999.Principles and practice of biomass fast pyrolysis processes for liquids,Journal of analytical and applied pyrolysis 51 3 -22
Ÿ BuQ,LeiH,RenS,WangL,HolladayJ,ZhangQ,TangJ,RuanR., 2011.Phenol and phenolics from lignocellulosic biomass by catalytic microwave pyrolysis,Bioresource technology 102 7004 -7007
Ÿ HuberGW,BrownRC, 2017.Prospects and Challenges of Pyrolysis Technologies for Biomass Conversion,Energy Technology 5 5 -6
Ÿ MaeK,HasegawaI,SakaiN,MiuraK., 2000.A new conversion method for recovering valuable chemicals from oil palm shell wastes utilizing liquid-phase oxidation with H2O2 under mild conditions,Energy & fuels 14 1212 -1218
Ÿ MenendezJA,ArenillasA,FidalgoB,FernandezY,ZubizarretaL,CalvoEG,BermudezJM, 2010.Microwave Heating Processes involving Carbon Materials,Fuel Processing Technology 91 1 -8
Ÿ MushtaqF,AbdullahTAT,MatR,AniFN, 2015.Optimization and characterization of bio-oil produced by microwave assisted pyrolysis of oil palm shell waste biomass with microwave absorber,Bioresource Technology 190 442 -450
Ÿ MushtaqF,ChannaAS,MatR,AniFN, 2014a.Microwave Assisted Pyrolysis of Waste Biomass Resources for Bio-Oil Production,Applied Mechanics and Materials 554 307 -311
Ÿ MushtaqF,MatR,AniFN, 2014b.,The Performances of Intimately Mix and Layer Methods in Microwave Assisted Pyrolysis System. Applied Mechanics and Materials 554 150 -154
Ÿ MushtaqF,MatR,AniFN, 2014c.Pyrolysis of Solid Palm Waste Biomass with Microwave Absorber under Microwave Irradiation,Proceedings of the 2014c Applied Mechanics and Materials 73 -
Ÿ MushtaqF,MatR,AniFN, .(2014d). A review on microwave assisted pyrolysis of coal and biomass for fuel production,Renewable and Sustainable Energy Reviews 39 555 -574
Ÿ MushtaqF,MatR,AniFN, 2016.Fuel production from microwave assisted pyrolysis of coal with carbon surfaces,Energy Conversion and Management 110 142 -153
0

Citations

0

Downloads

38

Views