No Detail Found!

Performance of Conventional Drilling Fluids and Nano Based Drilling Fluids.

Author(s)
Imtiaz Ali Department of Petroleum and Gas Engineering, Balochistan University of Information Technology, Engineering and Management Science, Quetta, Pakistan
Rizwan Iqbal Department of Geological Engineering, Balochistan University of Information Technology, Engineering and Management Science, Quetta, Pakistan
Hamid ullah Department of Chemistry, Balochistan University of Information Technology, Engineering and Management Science, Quetta, Pakistan
Saira Department of Geological Engineering, University of Engineering and Technology, Lahore, Pakistan
Abstract
The world's energy demand is about to increase over 60% in next 30 years. Several mature fields are nearly in depleting conditions. The oil and gas industry is striving to seek advance methods for the recovery of the remaining hydrocarbons which are difficult to produce using conventional recovery methods. Drilling is the only way which provides a path to produce the hydrocarbons from subsurface. During drilling operations, oil and gas industry faces several problems including borehole instability, torque and drag, sticking, bit balling and issues due to high pressure high temperature (HPHT) environment etc. These challenges can only be minimized using a suitable drilling fluid system, composed of Nano-scale particles for turning the behavior of the rheological properties of drilling fluid to ensure safe drilling and production operations. Nano-scale particles are usually very ultra-fine materials, whose size ranges between the size of atom and ordinary micro-scale particles having high specific surface area of interaction. The nano-scale particles used as an additive which exhibit strong potential inhibition both internally and externally. Due to the high specific surface area of nano sized particles, these fluids need very low concentration of the additives used. This paper depicts the potential challenging problems encountered during drilling activity. It is also compared that how nano based smart fluids can overcome the drilling problems by improving drilling fluids properties like viscosity, density, and filtration properties etc.
Publication Details
Page(s) 12-21
DOI DOI not available
Published Journal: Journal of Applied and Emerging Sciences , Volume: 7, Issue: 1, Year: 2017

Request the full text from PASTIC

References
Ÿ HemphillT,CamposW,PilehvariA., 1993.Yield-power law model more accurately predicts mud rheology,Oil and Gas Journal 91 -
Ÿ HillerK., 1963.Rheological measurements on clay suspensions and drilling fluids at high temperatures and pressures,Journal of Petroleum Technology 15 779 -788
Ÿ James R and HellandB., 1992.The Greater Ekofisk area: addressing drilling fluid challenges with environmental justifications,Proc. 1992 SPE European Petroleum Conference. -
Ÿ MaglioneR,RobottiG,RomagnoliR., 2000.In-situ rheological characterization of drilling mud,SPE Journal 5 377 -386
Ÿ MahtoV,SharmaV., 2004.Rheological study of a water based oil well drilling fluid,Journal of Petroleum Science and Engineering 45 123 -128
Ÿ MarshallC,HumbertR,ShawB,CaldwellOg., 1942.Studies of clay particles with the electron microscope:II. The fractionation of beidellite, nontronite, magnesium bentonite, and attapulgite,Soil Science 54 149 -158
Ÿ MeisterM,LeeJ,KruegerV,GeorgiD,ChemaliR., 2003.Formation pressure testing during drilling: challenges and benefits,SPE Annual Technical Conference and Exhibition. -
Ÿ Rocha L A S , Junqueira P,RoqueJ, 2003.Overcoming deep and ultra deepwater drilling challenges,Offshore Technology Conference. -
Ÿ Scott PD., 2007.Overview: Drilling and Completion Fluids,Journal of Petroleum Technology 59 78 -78
Ÿ SridharaV,SatapathyLN., 2011.Al 2 O 3-based nanofluids: a review,Nanoscale research letters 6 1 -7
Ÿ Steiger R P., 1982.Fundamentals and use of potassium/polymer drilling fluids to minimize drilling and completion problems associated with hydratable clays,Journal of Petroleum Technology 34 1661 -1670
Ÿ SuleimanovB,IsmailovF,Veliyev E., 2011.Nanofluid for enhanced oil recovery,Journal of Petroleum Science and Engineering 78 431 -437
Ÿ Wasan D T and NikolovAD., 2003.Spreading of nanofluids on solids,Nature 423 156 -159
Ÿ Whitesides G M., 2005.Nanoscience, nanotechnology, and chemistry,Small 1 172 -179
Ÿ YuW,XieH., 2012.A review on nanofluids: preparation, stability mechanisms, and applications,Journal of Nanomaterials 1. -
0

Citations

0

Downloads

36

Views