No Detail Found!

Optimization of Process Parameters for Gas Metal Arc Welding of Dissimilar Aa7075 and Aa6063 aluminium Alloys using Artificial Neural Networks (Ann).

Author(s)
G Swaminathan Department of Mechanical Engineering, SRM University, Ramapuram Campus, Chennai-89, India
A Mathivanan Department of Mechanical Engineering, SRM University, Ramapuram Campus, Chennai-89, India
S D Kumar Department of Mechanical Engineering, SRM University, Ramapuram Campus, Chennai-89, India
C Uthirapathy Department of Mechanical Engineering, SRM University, Ramapuram Campus, Chennai-89, India
Abstract
The present investigations deal with the effect and optimization of gas metal arc welding parameters on the mechanical properties in welding of dissimilar AA7075 and AA6063 Aluminum alloys. The process parameters used are current, voltage and gas flow rate and Taguchi experimental design method were followed. Tensile strength and Impact strength have been found for the optimum welding parameters. Further an Artificial Neural Network model was developed for the analysis and simulation of the correlation between process parameters and mechanical properties. The input for the model is current, voltage and gas flow rate and the output for the model is Tensile and Impact strength. The combined influence of current, voltage and gas flow rate on the mechanical properties of the joint was simulated. The model can calculate tensile strength and impact strength as functions of process parameters. Lastly a comparison was made between the measured and calculated value and it was found that the calculated results were in agreement with the measured data.
Publication Details
Page(s) 56-60
DOI DOI not available
Published Journal: Pakistan Journal of Biotechnology, Volume: 15, Issue: S2, Year: 2018

Request the full text from PASTIC

References
ChandanKaushal,:, 2015.Lochan Sharma, To Determine Effects of Gas Metal Arc Welding (GMAW) Parameters on Mechanical Properties of Aluminium Alloys,International Journal of Innovative Research in Science, Engineering and Technology 4 -
ChandanKaushal and Lochan Sharma, 2014.To find effects of GMAW parameters on Mechanical Properties of Aluminum Alloys,International Journal of Engineering Research and Applications 4 11 88 -92
HemantChauhan,N.D.Chauhan,ParthivTrivedi,:, 2014.A Review on an Effect of Process Parameters on Mechanical and Metallurgical Properties of Aluminium Weld Joints using Gas Metal Arc Welding (GMAW) Process,International Journal for Scientific Research & Development 2 -
LadislavKolarik,JaroslavKopriva, 2015.Influence of shielding gas on GMA welding of Al alloys,Science Journal -
Nirmala , L.,C.Yuvaraj,K.P.Rao, 2013.Seenappa, Microstructural and Mechanical Behavior of Zinc-Aluminium Cast Alloys,International Journal of Mechanical Engineering, & Technology (IJMET) 4 243 -248
RakeshRanjan,:, 2016.Ajit Kumar and Avinaw Pratik, Effect of Welding parameters on bead geometry of weld by GMAW Process,International Journal of Engineering Development and Research 4 -
Venkadeshwaran , P.,R.Sakthivel,R.Sridevi,R. AhamedMeeran,K.Chandrasekaran, 2015.Optimization of welding parameter on AA2014 in GMAW,International Journal of Emerging Technology and Innovative Engineering I(2): -
0

Citations

0

Downloads

58

Views