No Detail Found!

Stabilize consequences of Y2O3 in Zirconia thermal barrier coatings (TBC).

Author(s)
Muhammad Farooq Institute of Chemical Engineering and Technology, University of the Punjab, Lahore, Pakistan
Shahzad Alam Pakistan Institute of Minerals and Advanced Engineering Materials, PCSIR Laboratories, Lahore Pakistan
Shahzad Naseem Center for Solid State Physics, University of the Punjab, Lahore, Pakistan
Saleem Farooq Shaukat Department of Physics, COMSATS IIT, Lahore, Pakistan
Robina Farooq Department of Chemical Engineering, COMSATS IIT, Lahore, Pakistan
Abstract
The accumulation of cubic stabilizing oxides is a pre-requisite for the use of Zirconia as a main voter in thermal barrier coating. These can be added in ample amounts to form a partially stabilized Zirconia or to form a fully stabilized Zirconia. Zirconia yttria (ZrO2.Y2O3) coating deposited by plasma spray method is widely used in industry as a thermal barrier coating (TBC).Development of narrative and innovative ceramic materials, which have brought about significant hi-tech change, predominately by Y2O3 for the accumulation of varying amounts of cubic stabilizing oxide. This paper is a study on the effect of stabilizer on performance of ZrO2 thermal barrier coatings. For experimentation, Y2O3 complete characterization was done with ZrO2.Y2O3 coated samples to optimize the micro structural, mechanical properties and characterization, using the latest techniques. It was observed that porosity content in all the coated samples was not very high. However the porosity content was uniformly distributed and pore size was small. It has been revealed that, in case of small porosity content, hardness values of thermal barrier coating with stabilizing effect of yttria were not very high.
Publication Details
Page(s) 37-41
DOI DOI not available
Published Journal: Journal of Chemical Society of Pakistan, Volume: 35, Issue: 1, Year: 2013

Request the full text from PASTIC

0

Citations

0

Downloads

54

Views