[1] Amos , M., 2011.Advanced Industrial X-ray Computed Tomography for Defect Detection and Characterisation of Composite Structures,Ph.D. Thesis -
[2] Arman , Y.,Zor , M.,Aksoy , S., 2006.Determination of critical delamination diameter of laminated composite plates under buckling loads,Composites Science and Technology 66 2945 -2953
[3] Arnold , R.,Hussain , A.,Mayers , J., 1986.Buckling, postbuckling, and crippling of shallow-curved composite plates with edge stiffeners,Journal of Aircraft 23 589 -598
[4] Arvin , A.C.,Bakis , C.E., 2006.Optimal design of pressfitted filament wound composite flywheel rotors,Composite Structures 72 47 -57
[5] Aslan , Z.,Sahin , M., 2009.Buckling behaviour and compressive failure of composite laminates containing multiple large delaminations,Composite Structures 89 382 -390
[6] Avilés , F.,Carlsson , L., 2007.Post-buckling and debond propagation in sandwich panels subject to in-plane compression,Engineering Fracture Mechanics 74 794 -806
[7] Bakis , C.E.,Bank , L.C.,Brown,Cosenza , E.,Davalos , J.,Lesko , J.,Machida , A.,Rizkalla , S.,Triantafillou , T., 2002.Fibre-reinforced polymer composites for construction-state-of-the-art review,Journal of Composites for Construction 6 73 -87
[8] Bambach , M., 2009.Photogrammetry measurements of buckling modes and interactions in channels with edge-stiffened flanges,Thin-Walled Structures 47 485 -504
[9] Barbero , E.J., 2017.,3rd edition 534 -
[10] Barbero , E.J., 2010.,2nd edition 562 -
[11] Beznea , E.F.,Chirica , I., 2011.Buckling and postbuckling analysis of composite plates,INTECH Open 10 -
[12] Bisagni , C.,Lanzi , L., 2002.Post-buckling optimisation of composite stiffened panels using neural networks,Composite Structures 58 237 -247
[13] Boggs , P.T.,Tolle , J.W., 1995.Sequential quadratic programming,Acta Numerica 4 1 -51
[14] Morales , J.L.,Nocedal , J.,Wu , Y., 2011.A sequential quadratic programming algorithm with an additional equality constrained phase,IMA Journal of Numerical Analysis 32 553 -579
[15] Muc , A.,Gurba , W., 2001.Genetic algorithms and finite element analysis in optimization of composite structures,Composite Structures 54 275 -281
[16] Nagendra , S.,Haftka,Gurdal , Z., 1992.Stacking sequence optimization of simply supported laminates with stability and strain constraints,AIAA Journal 30 2132 -2137
[17] Naik , G.N.,Murty , A.K.,Gopalakrishnan , S., 2005.A failure mechanism based failure theory for laminated composites including the effect of shear stress,Composite Structures 69 219 -227
[18] Onoda , I.J.,StructuralDynamics, 1985.On the laminate configurations which maximize the axial buckling loads of composite cylindrical shells,26th Structures 800 -
[19] Parlapalli , M.,Shu , D., 2004.Buckling analysis of twolayer beams with an asymmetric delamination,Engineering Structures 26 651 -658
[20] Reddy , A.,Rehfield , L.,Bruttomesso , R.,Krebs , N.,StructuralDynamics, 1985., 15 -17
[21] Sadagopan , D.,Pitchumani , R., 1998.Application of genetic algorithms to optimal tailoring of composite materials,Composites Science and Technology 58 571 -589
[22] Sargent , P.M.,Ige , D.O.,Ball , N.R., 1995.Design of laminate composite layups using genetic algorithms,Engineering with Computers 11 59 -69
[23] Shukla , K.,Nath , Y.,Kreuzer , E.,Kumar , K., 2005.Buckling of laminated composite rectangular plates,Journal of Aerospace Engineering 18 215 -223
[24] Sivakumar , K.,Iyengar , N.,Kalyanmoy , D., 1999.Optimum design of laminated composite plates undergoing large amplitude oscillations,Applied Composite Materials 6 87 -98
[25] Soremekun , G.,Gürdal , Z.,Haftka , R.,Watson , L., 2001.Composite laminate design optimization by genetic algorithm with generalized elitist selection,Computers and Structures 79 131 -143
[26] Starnes , J.,Knight , N.,Rouse , M., 1985.Postbuckling behavior of selected flat stiffened graphite-epoxy panels loaded in compression,AIAA Journal 23 1236 -1246
[27] Stevens , K.,Ricci , R.,Davies , G., 1995.Buckling and postbuckling of composite structures,Composites 26 189 -199
[28] Subramani , M.N., 2017.Review on hybrid composite materials and its applications,International Research Journal of Engineering and Technology 4 1921 -1925
[29] Sultan , R.A.,Guirguis , S.W.,Younes , M.M.,El-Soaly , E., 2013.Delamination detection by thermography,International Journal of Engineering Research and Application 3 279 -288
[30] Sultan , R.,Guirguis , S.,Younes , M.,El-Soaly , E., 2012.Active infrared thermography technique for the non destructive testing of composite material,International Journal of Mechanical Engineering and Robotics Research 1 131 -142
[31] Tafreshi , A., 2004.Delamination buckling and postbuckling in composite cylindrical shells under external pressure,Thin-walled Structures 42 1379 -1404
[32] Tarján , G.,Kollar , L.,Sapkás, 2009.Local web buckling of composite (FRP) beams,Journal of Reinforced Plastics and Composites -
[33] Tavares , S.,Castro , P., 2017.An overview of fatigue in aircraft structures,Fatigue and Fracture of Engineering Materials and Structures 40 1510 -1529
[34] Van der Burg , M.,NEN-EN, 2011.Plate Buckling in Design Codes: The Difference Between NEN 6771,Master Thesis 1 -5
[35] Verette , R., 1970.Stiffness, strength and stability optimization of laminated composites,Northrop Aircraft Corporation, Report NOR-70-138 -
[36] Wang , X.,Dong , K., 2007.Local buckling for triangular and lemniscate delaminations near the surface of laminated cylindrical shells under hygrothermal effects,Composite Structures 79 67 -75
[37] Yin , W.L.,Fei , Z., 1988.Delamination buckling and growth in a clamped circular plate,AIAA Journal 26 438 -445
[38] Yoshikawa , M.,Yamauchi , H.,Terai , H., 2008.Hybrid architecture of genetic algorithm and simulated annealing,Engineering Letters 16 339 -345